New Book

Almost done with the new book here is a preview on CA parallelization applications:

SCUBA part i

In order to film the ROV's I whipped up a quick "air backpack" for a little extra cinematic time beneath the waves. Now I recommend attaching balloons at the ends of the pipes as these contract as they lose air and help to maintain the pressure. Note that below certain depths it will become difficult and then impossible to breathe. Additoinally after certain lengths of time it will become impossible as the pressure becomes to low and you run out of air.

The breathing technique is a breath in through the mouthpeice and a breath(subsequent) out through the nostrils( the equipped mask has a fan, it is a Dolfino as is the snorkel.

Surgical tubing, or latex hose as hardware departments( such as Lowes) refer to them as was used for the tank to regulator atachment. A ribbed connector connects it, it you do end up doing this you are liable but I will recommend ensurig the tube is well pushed on to the 5/16 inch brass barb fitting which is hammered into a drilled 1/2 inch pvc(referring to pipe) end cap. Pressurizing can be done with a tire valve. I used a similiar system in the post on the tornado generator and it can be seen pressurizing bottle as an explosive vessel for tornado disruption.

I will be doing a few more post on Scuba equipment as I make it for use. Safe diving.

New ROV Company Site

I just launched the new company site at www.rovx.xyz.com where we manufacture ROV and parts. If you are interested in any of the products or would like to try to reduce the price, use the contact form there to email me. The webstore is accessible at http://www.rovx.xyz/#!blank/agnua.

Please Check it out and forward the site to interested colleagues and or friends.